¶ Printer Components Overview
¶ Centauri Carbon 2 Combo
¶ Model Comparison
| Model | CANVAS | Camera | LED Lighting | Max. Nozzle Temperature | Max. Heated Bed Temperature | Enclosure | Chamber Thermistor |
|---|---|---|---|---|---|---|---|
| Centauri 2 | Optional Add-on | Optional Add-on | Optional Add-on | 350 °C | 110 °C | Optional Add-on | Optional Add-on |
| Centauri 2 Combo | Supported | Optional Add-on | Optional Add-on | 350 °C | 110 °C | Optional Add-on | Optional Add-on |
| Centauri Carbon 2 | Optional Add-on | Supported | Supported | 350 °C | 110 °C | Supported | Supported |
| Centauri Carbon 2 Combo | Supported | Supported | Supported | 350 °C | 110 °C | Supported | Supported |
For more details, please refer to this table.
¶ Quick Start
- Unboxing:Centauri Carbon 2 Combo
- Packing:Centauri Carbon 2 Combo
- Centauri 2 Series User Manual (Centauri 2/Centauri 2 Combo)
- Centauri Carbon 2 Series User Manual (Centauri Carbon 2/Centauri Carbon 2 Combo)
- Centauri Carbon 2 Combo FAQ
¶ Printing and Operation Guides
- How to Use Time-lapse Photography
- Connect via ELEGOO Slicer & Matrix
- How to Manually Level the Heated Bed
- Control via ELEGOO Slicer Backend
- How to Export the Printing Log
- Model Coloring Guide (This guide applies to printer models equipped with CANVAS)
- How To Set a Smooth Support Contact Surface (This guide applies to printer models equipped with CANVAS)
- How to Print TPU (This guide applies to printer models equipped with CANVAS)
¶ Troubleshooting
¶ Error Code
- Error Code 101
- Error Code 102
- Error Code 103
- Error Code 104
- Error Code 205&206
- Error Code 304
- Error Code 605
- Error Code 701
- Error Code 702
- Error Code 703
- Error Code 704
- Error Code 705
- Error Code 706
- Error Code 707
- Error Code 801
- Error Code 802
- Error Code 1101
- Error Code 1102
- Error Code 1211
- Error Code 1220
- Error Code 1231
- Error Code 1241
- Error Code 1242
- Error Code 1243
- Error Code 1251
- Error Code 1252
- Error Code 1263
- Error Code 1265
- Error Code 1266&1267
- Error Code 2002&2003
¶ Filament Feeding and Nozzle Issues
- The Filament Load is Stuck and Unable to Feed Properly
- Clogged Nozzle
- Nozzle Purges at Incorrect Position
¶ Other Issues
¶ Parts Replacement
¶ Print Head and Extrusion System
- How to Replace the Hotend Kit(B0C241)
- How to Replace the Gearbox(B0C1L1)
- How to Replace the Tool Head Board(B0C2G1)
- How to Replace the Extruder Communication Board(B0C1B1)
¶ Filament Feeding and Purging System
- How to Replace the Feeder Motors(B1C081)
- How to Replace the Filament Detection Board(B0C1C1)
- How to Replace the Servomotor and the Servomotor Detection Board(B0C1E1/B0C1F1)
- How to Replace the Cutter Detection Board
- How to Replace the Excess Chute(B0C2J1)
¶ Cooling Fans and Air Filtration
- How to Replace the Heat Break Cooling Fan(B1C031)
- How to Replace the Model Cooling Fan(B1C051)
- How to Replace the Case Fan(B1C071)
¶ Sensors and Detection
- How to Replace the Pressure Sensors(B0C2L1)
- How to Replace the Adapter Board of the Pressure Sensor(B0C1H1)
- How to Replace the Chamber Thermistor(B0C2N1)
¶ Heated Bed and Platform Assembly
¶ Motion and Transmission System
- How to Replace the XY Timing Belts
- How to Replace the XY Rods and the XY Bearings
- How to Replace the Z-Axis Motor
¶ Main Control, Power Supply and Cables
- How to Replace the Motherboard(B0C1J1)
- How to Replace the Power Supply(B0C101)
- How to Replace the Upper Frame Board
- How to Replace the Touch Screen Ribbon Cable
¶ Lighting and Structural Parts
¶ Maintenance Tutorials
¶ Help us improve
If you have any ideas about the wiki pages, please let us know via ELEGOO official feedback channel.