¶ Tools and Materials
- A 2.5 mm Allen key
- A new hotend kit
¶ Tutorial Video
¶ Instructions
¶ Prepare the Printer
- Remove the lid.
- Remove the front glass door.
- On the touch screen, select Control > Homing.
- Wait for the homing process to complete.
- On the touch screen, select ↓ to lower the heated bed to the bottom.
¶ Power Off the Printer
-
Turn the power switch OFF (symbol O).
-
Unplug the power supply cable.
¶ Remove the Old Hotend Kit
-
Remove the front cover of the tool head.
-
Unplug the model cooling fan cable.
-
Loosen the screws securing the hotend kit with a 2.5 mm Allen key.
-
Remove the screws with a pair of tweezers.
-
Unplug the ceramic heating plate cable and the thermistor cable.
-
Remove the old hotend kit.
¶ Install the New Hotend Kit
-
Prepare the new hotend kit.
-
Plug in the ceramic heating plate cable and the thermistor cable.
- Tighten the two screws securing the hotend kit with a 2.5 mm Allen key.
¶ Reinstall the Tool Head Front Cover
-
Prepare the front cover of the tool head.
-
Plug in the model cooling fan cable.
- Install the front cover of the tool head.
¶ Restart and Calibrate the Printer
-
Plug in the power supply cable.
-
Turn the power switch ON (symbol |).
-
On the touch screen, select Settings > Calibration > One-Click Self-Check.
-
The printer is ready for use after the calibration is complete.
