Lift the top cover and use a 2.5mm Allen wrench to loosen the four screws securing the filler plate.
Remove the filler plate.
Take out the mounting bracket and align it with the screw holes where the filler plate was originally installed. Use a 2.5mm Allen wrench to tighten the two fixing screws.
Take out the Mini Heater. Align the Mini Heater with the mounting bracket and place it in the installation position. Use a 2.0mm Allen wrench to tighten the two screws securing the Mini Heater.(Note: Ensure that the Mini Heater’s temperature display screen faces inward toward the cover.)
Plug in the Mini Heater’s power supply, press the power switch, and the Mini Heater will start running automatically.