¶ Tutorial Video
¶ Instruction
- Open the top cover of the printer and pour the resin into the resin tank. The amount of resin poured must be between the minimum and maximum lines.
- Power on the printer. Insert the U disk.
- Touch"Print - USB file" on the touchscreen and select the model to be printed.
The current room temperature is approximately 10 °C, and the heating function of the resin tank is currently not activated. After the printing is completed, it is discovered that the printing failed due to low room temperature. Therefore, the heating function of the resin tank should be activated.
- Touch "Settings - Accessibility features - Tank Heating".
Note: After the heating function is activated, the resin tank can heat up to 30 ℃ before starting to print.
- Print the model again after cleaning up the residual resin in the resin tank. The printer prints the model after the resin tank heats up to 30 ℃. (The process takes about 30 minutes.)
- Additionally, users can activate the "Resin preheating" function in the Accessibility features. After clicking "Confirm", the resin tank can keep its temperature to 30 ℃ for 24 hours.
