PHECDA Window Mirror Cleaning Tutorial
Reference video
Tools and materials needed
 |
●Cotton swab X 1
●Alcohol (≥75%) X 1
●Plastic cup X 1
●Dust-free cloth X 1
Cleaning cycle
Engraving: 10 times;
Cutting: 5 times; (If the cutting material produces a lot of fumes, it is recommended to clean it after each use)
Precautions and Machine state before starting operation
●Please turn off the engraving machine and disconnect the power supply.
Operation guide
Step 1 - Wear nitrile gloves, push the X-axis to the rear, and stand the PHECDA up.
 |
 |
Step 2 - Pour the alcohol into a plastic cup and dip a cotton swab into the alcohol.
 |
 |
Step 3- Repeatedly wipe the window mirror surface with a cotton swab until all stains are removed.
 |
 |
Step 4- Wipe the window mirror clean with a dust-free cloth, lay the PHECDA flat, and the window mirror cleaning is completed.
 |
 |
Note: If the window mirror is not cleaned for a long time, it may cause irreversible damage to the window mirror. If the above operation still cannot clean it, the window mirror may be burned out and need to be replaced with a new one.
 |
 |
 |
 |
 |
 |
 |
 |