After turning on the printer, the touchscreen or Fluidd displays the following error message:
Section 'gcode_shell_command clear_plr' is not a valid config section
The firmware was updated through Fluidd. The Orange Storm Giga uses a customized version of Klipper. Firmware updated via Fluidd is not the official version provided by Elegoo, which can cause the printer to become bricked (unusable).
Please refer to the link below to update the fixing firmware:
https://wiki.elegoo.com/orangestorm-giga/how-to-use-the-fixing-firmware
Please refer to the link below to update the mainboard and touchscreen firmware.
Note: The mainboard firmware and touchscreen firmware must match. Updating only the mainboard firmware without updating the touchscreen firmware will cause abnormal printer functions.
https://wiki.elegoo.com/orangestorm-giga/how-to-update-the-firmware
Orange Storm Giga image file download link:
https://github.com/ELEGOO-3D/OrangeStorm-Giga-Image/releases/tag/elegoo_klipper_20240430_GIGA_V3.0
The method for updating the image file is the same for Neptune 4 series printers and the Giga.
How to update the image file:
https://wiki.elegoo.com/machines/neptune/maintenance/neptune-4-series/image-installation-methods