¶ Mercury Plus 3.0 - Cleaning Bucket Turntable Replacement
¶ Tools and Materials
A 2.5 mm Allen Wrench
¶ Tutorial Video
¶ Instructions
1.Remove the cover and take out the cleaning bucket.
2.Open the top cover of the cleaning bucket to take out the cleaning basket.
3.Use a 2.5 mm Allen wrench to loosen the screw fixing the turntable at the bottom of the cleaning bucket.
4.Take out the old gasket and then remove the old turntable from the cleaning bucket.
5.Prepare the new turntable of the cleaning bucket. Put it in the installation position by aligning it with the screw holes.
6.Put the gasket in the installation position and use a 2.5 mm Allen wrench to tighten the screw fixing the turntable.
7.Put the cleaning basket in the installation position.
8.Put the cleaning bucket filled with alcohol in the installation position and cover it with the outer casing.
9.Turn on the machine, select cleaning mode, set the time, and once the turntable rotates properly, it's ready to use.
