¶ Tutorial Video
https://www.youtube.com/watch?v=vHs5ky3Yf5E
¶ Instruction
- Open ChituManager. Click "Add Printer" in the "Manage".
- Activate the "Time-lapse" function according to demands.
- Click "Printer" - "Video Surveillance" to view the real-time model printing on the computer.
- The time-lapse video can be exported by clicking "Historical record".
Note: The "Time-lapse" function should be activated before the printing process starts. The video can be created after the model is higher than 50 mm.
