Tools and materials needed
- 200-grit sandpaper, 600-grit sandpaper, 1000-grit sandpaper
- Craft knife
- Brush
Reference video
https://youtu.be/gomZd_tL0lE
- For support points on large smooth surfaces, use 200-grit sandpaper for the first round of sanding.
- After sanding, use a brush to clean the powder residue and check the remaining support marks.
- On the second pass, use 600-grit sandpaper to address any missed areas on the model surface during the first pass. Repeat the sanding process as needed and brush off the powder residue.
- On the third pass, use 1000-grit sandpaper to finely sand the remaining support marks.
- For support points in intricate areas or protruding edges, where sanding with sandpaper is not feasible and may damage the overall model details, gently scrape them off with a craft knife.
- Repeat the same method to process the remaining models.