Tools and materials needed
- Glue
- Detail needle
- 600-grit sandpaper, 1000-grit sandpaper
- Resin
- Brush
- 405nm UV flashlight
Reference video
https://youtu.be/9Y-1Fr8onD4
- Use glue to assemble the various parts of the model.
- If there are visible gaps at the connection points, use a detail needle or tweezers to apply resin drops onto the sidewalls of the gaps. Then, cure with a UV flashlight for 2-3 seconds.
- Fill the gaps using a small amount of resin in multiple passes.
- After filling, use 600-grit sandpaper to sand the filled gap positions.
- Use a brush to clean the powder residue and check the condition of the sanded gaps.
- Use 1000-grit sandpaper for fine sanding around the filled gaps to achieve a smooth surface.
- During the sanding process, closely observe and avoid damaging the model’s overall details.