1. Check whether the exposure parameters are accurately set, refer to the table below
https://docs.google.com/document/d/1QikBnAB8cfXsI91mmdNEiQVeZV1lFAa7/edit
2. Check whether the support and support contact points of the model are firm; please send us the ".ctb" file for analysis
3. Check whether the FEP has been worn out; whether the surface is rough and scratched; please take photos and send them to us for verification
4: Make sure the leveling is good, it is recommended to refer to the manual for leveling.
PS: Please make sure to clean the water tank and filter the resin before printing. If there is resin residue in the Vat, it will probably lead to print failure.
Translated with www.DeepL.com/Translator (free version)