¶ Tools and Materials
-
Cotton swabs
-
Alcohol
-
A scraper
-
Dust-free cloth
¶ Tutorial Video
https://www.youtube.com/watch?v=IxZObqwC6so
¶ Instruction
Note: Cured resin on the LCD screen is typically caused by resin tank leakage. After cleaning the cured resin, check the condition of the release film.
-
Apply an alcohol-soaked cotton swab around the cured resin. Wait for about 5 minutes to allow the alcohol to soak and soften the cured resin.
Note: Apply in small amounts multiple times.
-
Remove cured resin with the scraper.
Note: If the cured resin is still difficult to remove, repeat the step. This method is only applicable to printers with tempered glass film on the LCD screen surface.
-
After scraping off the cured resin, clean thoroughly the LCD screen surface with alcohol-soaked dust-free cloth.
