Jupiter SE-Limit Switch Replacement
Tools and materials needed
● 2.5mm Allen wrench
●2.0mm Allen wrench
●Diagonal pliers
●Limit switch
Reference video
Operation steps
1. Use diagonal pliers to cut off the hot melt glue on the cable port.
 |
2. Use a 2.5mm Allen wrench to loosen the 2 screws fixing the limit switch.
 |
 |
3. Unplug the cable from the limit switch port.
 |
4. Take out the new limit switch, insert the limit switch cable, align the limit switch with the screw holes, put it in the mounting position, use a 2.5mm Allen wrench to tighten the two screws fixing the limit switch, and the installation is complete.
 |
 |
5. Plug in the printer power supply and turn on the printer.
 |
6. Operate "[Tools]-[Manual]" on the touch screen, click the "[Return to zero]" button, and the printer will return to zero.
 |
 |
 |
7.Observe that the printer zeroing movement is normal. After re-leveling the printer, it can be used normally.
 |