¶ Possible Causes
Pump Tube Loose
¶ Required Tools
Phillips Screwdriver
¶ Troubleshooting Steps
-
Turn off the printer power switch and unplug the power cord.
-
Lift up the side cover of the automatic feeding box.
.png)
-
Use a Phillips screwdriver to remove the three screws fixing the pump cover, then remove the pump cover.
.png)
-
Check whether the right-side pipe connector is loose. If loose, firmly reinsert the tube into its original position.
.png)
The image below shows the normal condition.
.png)
¶ Still not resolved?
Please contact the technical support team by email (3dp@elegoo.com).