¶ Tools and Materials
- Cotton swabs
- Alcohol
- Scraper
- Dust-free cloth
¶ Tutorial Video
Coming soon.
¶ Instruction
Note: Cured resin on the LCD screen is typically caused by the leakage of the resin tank. After cleaning the resin, it is necessary to check the condition of the release film.
- Use a cotton swab dipped in alcohol and apply the alcohol around the cured resin. Wait about 5 minutes for the soaking of the cured resin to soften.
Note: Apply the alcohol in a small amount for multiple times.
- Tilt the scraper to remove the cured resin. Repeat the steps if the cured resin is still difficult to remove.
Note: This method only applies to printers with a screen protector on the LCD screen.
- Wipe the surface of the LCD screen clean using a dust-free cloth moistened with alcohol.
