The ELEGOO Jupiter 2 currently supports only ELEGOO SatelLite. We plan to add compatibility with additional slicers, including Lychee Slicer, in a future update.
The ELEGOO Jupiter 2 currently supports only ELEGOO SatelLite. We plan to add compatibility with additional slicers, including Chitubox Pro, in a future update.
We are actively working on expanding slicer compatibility. Please stay tuned for future updates. We will share more information as it becomes available.
The print settings for the ELEGOO Jupiter SE can be used as a starting point for the Jupiter 2. The ELEGOO Jupiter 2 currently does not support the .ctb file format.
Yes, the ELEGOO Jupiter 2 supports online slicing and remote printing.
When the doors are fully open, the minimum space required is 1150 × 670 × 660 mm. We recommend opening the doors fully to ensure easy access to the build plate and resin tank.
We strongly recommend opening the doors fully for safe and convenient access to the build plate and resin tank. Partial opening may restrict access and is not advised. The minimum space required with doors fully open is 1150 × 670 × 660 mm.
Most standard 405 nm resins are compatible with the ELEGOO Jupiter 2. However, we recommend performing a small test print first to verify performance and exposure settings with your specific resin.
Yes, water-washable clear resins are compatible with the ELEGOO Jupiter 2.
We recommend cleaning the resin tank with IPA (isopropyl alcohol). Alternatively, you may rinse the tank with a small amount of the new resin before refilling. For more details, please refer to this link
Yes. The ELEGOO Jupiter 2 is equipped with a rear exhaust port with a diameter of 75 mm, allowing connection to an external air exhaust system.
No, the ELEGOO Jupiter 2 does not include a built-in drip hanger.
The pixel size of the ELEGOO Jupiter 2 is 20 × 26 µm.
At this time, there are no plans to offer a ballscrew upgrade kit for the ELEGOO Jupiter 2.
The typical lifespan of the ELEGOO Jupiter 2 LCD screen is approximately 2,000 hours. To maximize screen life, we recommend avoiding unnecessarily long exposure times and following proper maintenance procedures.
Considering the convenience of replacement and product quality consistency, we have not yet launched a standalone release film for the J2. However, to provide users with more cost-effective options, we are currently validating a non-metal frame design that offers a more competitive price. Please stay tuned for updates.
We have noted the demand for a wash and cure station designed for the Jupiter 2 build plate size. This feedback has been shared with our product development team for future consideration.
Yes, the Marsmate Air Purifier is compatible with the ELEGOO Jupiter 2.