¶ Operation Steps for Each Model
The steps below are based on Centauri Carbon 2 Combo. For other models, skip the steps related to parts that are not installed.
| Model | Action | Steps to Skip |
|---|---|---|
| Centauri Carbon 2 Combo | Follow all steps | None |
| Centauri Carbon 2 | Skip lid removal step |
|
| Centauri 2 Combo | Skip lid removal step |
|
| Centauri 2 | Skip lid removal step |
|
If your printer has optional accessories installed, such as CANVAS or an enclosure, follow the steps related to those parts.
¶ Tools and Materials
- A 2.0 mm Allen key
- A new excess chute
¶ Instruction
¶ Preparation
- On the touchscreen, select 30 mm - ↓ to lower the heated bed to the bottom.
- On the touch screen, select 30 mm - +X to move the tool head to the right side of the excess chute.
-
Turn the power switch OFF (symbol "〇") and unplug the power supply cable.
-
Remove the lid.
¶ Remove the old excess chute
- Loosen the 4 screws securing the excess chute on the back cover of the printer with a 2.0 mm Allen key.
- Remove the old excess chute.
¶ Install the new excess chute
-
Put the new excess chute in the installation position and align it with the screws.
-
Tighten the 4 screws securing the excess chute on the back cover of the printer with a 2.0 mm Allen key.
¶ Restart the printer
-
Plug in the power supply cable and turn the power switch ON (symbol "|").
-
On the touch screen, select Function - home and the printer starts the homing process.
- Confirm that the homing process completes normally and the heated bed and the nozzle do not scrape the excess chute, the printer is ready for use.
¶ Help us improve
If you have any ideas about the wiki pages, please let us know via ELEGOO official feedback channel